Cisco Aironet 1231G, AIR-AP1231G-A-K9 wall or ceiling mountable 802.11G wireless access point

Description

• Manufacturer : Cisco Systems, Inc
• Manufacturer Part Number : AIR-AP1231G-A-K9
• Brand Name : Cisco
• Product Line :</b. Aironet
• Product Series : 1200
• Product Name :</b. Aironet 1200 802.11g Wireless Access Points/BridgeThe Cisco Aironet 1200 Series IEEE 802.11 g Access Point sets the enterprise standard for high-performance, secure, manageable, and flexible wireless LANs (WLANs). The modular design of the Cisco Aironet 1200 allows single or dual radio configuration for up to 54 Mbps connectivity in 2.4 GHz band and is fully compliant with IEEE 802.11g standard. Providing numerous configuration and upgrade options, the Cisco Aironet 1200 Series supports a variety of clients in mixed frequency and mixed throughput environments.

• Product Type : Wireless Access Point
• Wireless LAN Standard : IEEE 802.11b/g
• ISM Band : Yes
• ISM Minimum Frequency :2.41 GHz
• ISM Maximum Frequency : 2.40 GHz
• Total Number of Antennas : 2
• Antenna Connector :RP-TNC Connector
• Indoor Antenna Range : 410 ft
• Outdoor Antenna Range : 700 ft
• Wireless Transmission Speed : 54 MbpsWireless Security :
• Authentication: 802.1X support, including Cisco LEAP, EAP-Flexible Authentication via Secure Tunneling (EAP-FAST), Protected EAP- Generic Token Card (PEAP-GTC), PEAP-Microsoft Challenge Authentication Protocol Version 2 (PEAP-MSCHAPv2), EAP-Transport Layer Security (EAP-TLS), EAP-Tunneled TLS (EAP-TTLS), and EAP-Subscriber Identity Module (EAP-SIM) to yield mutual authentication and dynamic, per-user, per-session encryption keys (WPA and WPA2) MAC address and standard 802.11 authentication mechanisms
• Encryption:
  AES-CCMP encryption (WPA2)
  TKIP encryption enhancements: key hashing (per-packet keying), message integrity check (MIC) and broadcast key rotation via Cisco TKIP or WPA TKIP
  Support for static and dynamic IEEE 802.11 WEP keys of 40 and 128 bits
• Fast Ethernet Port Yes
• Management Port : Yes
• Management :
  Telnet
  SNMP
• Input Voltage :
  110 V AC
  220 V AC
  48 V DC
• Power Source : Power Supply
• Form Factor :
  Wall Mountable
  Ceiling Mountable
• Height : 1.7″
• Depth : 7.2″
• Weight (Approximate) : 1.50 lb
• Regulatory Domains: FCC ,li> 2 x RP-TNC Connectors
• Uplink: Autosensing 802.3 10/100 Base-T Ethernet
• Cisco IOS Software ,li>Avail Cardbus Slot
• Processor: IBM PowerPC405 (200 MHz)
• Input Power Requirements:
  90 to 240 VAC ±10 percent (power supply)
  48 VDC ±10 percent
• Memory::
  16 MB RAM
  8 MB Flash memory
• LEDs::
  Ethernet activity and status
  Device operating status
  Radio activity and status
• System Requirements : Antenna purchase is REQUIRED for the device to function
• Certifications & Standards :
  IEEE 802.11b
  IEEE 802.11g
  Wi-Fi
  FCC Bulletin OET-65C
  RSS-102
• Safety::
  UL 60950
  UL 2043
  CAN/CSA C22.2 No. 60950
  IEC 60950
• Radio::
  FCC Part 15.247
  RSS-210 (Canada)
  EN 300.328
  ARIB-STD 33 (Japan)
  ARIB-STD 66 (Japan)
  AS/NZS 4268:2003 (Australia and New Zealand)
• EMI and Susceptibility (Class B):
  FCC Part 15.107 and 15.109
  ICES-003 (Canada)
  VCCI (Japan)
  EN 301.489-1 and -17 (Europe)
• Security:
  802.11i
  WPA2
  WPA
  802.1X
  AES
  TKIP