Description
The 4200 Cable Management System (4200 CMS) is designed for long haul applications and smaller offices where cable locate and/or cable monitoring capacity for one to four cable routes of up to 75 miles (125 km) each is required.
Description
The 4200 Master Shelf (MS) is a pre-wired chassis complete with Line Interface Card (LIC), User Interface Card (UIC), modem, RS-232 interface and local user interface. The LIC provides protection and conditioning to all 4200 MS inputs and outputs. The UIC interfaces system hardware with the user. An Advanced User Interface Card (AUIC) which provides an expanded data base and SNMP functionality is also available as an optional upgrade for the UIC. The chassis can accommodate a 4200 Multi-Tone Module (MTM) and up to four system line cards including 4200 Alarm Circuit Unit (ACU), 4200 Cathodic Protection Card (CPC) and 4200 Optical Alarm Unit (OAU). New system line cards are planned for future release and can easily be added to a vacant slot in the MS. Additional capacity or features can be added, as needs change, via remote programmable firmware on all installed cards. The 4200 MS is configurable for remote access via standard subscriber line, RS-232 channel, order wire or supervisory network.
The 4200 MS is 3 1/2 inches high (2 units). The system can be rack mounted in either a 19 or 23 inch relay rack with the adjustable brackets provided. The front panel has an LCD displaying system status and alarm conditions. The rear panel has external O/P ports for dry alarm contacts. The four-button keypad is for local
Features
- Mounts in standard 19″ (483mm) or 23″ (585mm) relay rack
- Two units or 3 1/2 ” (89mm) of vertical rack space
- Monitors 300 miles (500 km) of cable sheath and up to 3196 splice/security sensors
- Both centered and flush mounting in rack
- Line Interface Card
- User Interface Card or Advanced User Interface Card
- LCD status panel
- Four-button keypad for local control
- Dial-up or RS-232 serial access for alarm reporting or remote control
- External dry alarm contact output ports
Specificaitons
General Monitoring Specifications
INPUT VOLTAGE: -46 to -56VDC
ACU CURRENT READOUT RANGE: 0 – 30 mA
CPC CURRENT READOUT RANGE: 0 – 120 mA
CURRENT READING ACCURACY: 5%
MAXIMUM MONITORING DISTANCE: 60 mi / 100 km
General Tone Signal Specifications
TONE LOCATE FREQUENCY RANGE: 5 Hz to 10k Hz
COMPLEX FREQUENCY GENERATION: 5 Hz to 1kHz
MAXIMUM POWER OUTPUT: 50 W
MAXIMUM VOLTAGE OUTPUT: 100 V rms
MAXIMUM CURRENT OUTPUT: 500 mA
MAXIMUM LOCATE DISTANCE: 60 mi / 100 km
Dimensions:
17 x 12 x 3.5 in (43 x 30.5 x 9 cm)
Weight:
14 lbs (6.4 kg)
Operating Temperature Range:
+59°F to +86°F (+15°C to +30°C)
Reviews
There are no reviews yet.